As we all know the fuel prices especially the petrol is rising steadily day by day. Again the pollution due to vehicles in metro cities & urban areas is increasing continuously. To overcome these problems, an effort is being made to search some other alternative sources of energy for the vehicles. Again, it is also not affordable to purchase vehicles (mopeds, scooters or motorcycles) for all the class of society. Keeping this in mind, a search for some way to cater these economically poor people as well as to provide a solution for the environmental pollution was in progress. The solar assisted bicycle developed is driven by DC motor fitted in front or rear axle housing & operated by solar energy. The solar panels mounted on the carriage will charge the battery & which in turn drive the hub motor. When the bicycle is idle, the solar panel will charge the battery. This arrangement will replace the petrol engine, the gear box & the fuel tank in case of a two wheeler or a chain sprocket, chain & gear shifting arrangement of conventionalbicycle being used by most common man.As a part of dissertation work, the solar assisted bicycle is fitted with a dc hub motor on front axle of a bicycle with power rating of 250W and with a travelling speed of around 25-30 kmph. It is provided with a pair of lead acid batteries of 35 Ah each, a photovoltaic solar panel with capacity of 20 watt, a voltage regulator of 24v 10Amp, accelerator and motor controller of 24v 25Amp. There is also a provision for charging of the battery with 220-240V, AC wall outlet supply, in case of poor solar supply due to cloudy weather.

Solar Assisted Bicycle (SAB), Hub Motor, Solar Panel, Motor Controller, Voltage Regulator

[1] T. Markel, K. Bennion and W. Kramer, National Renewable Energy Laboratory & J. Bryan and J. Giedd Xcel Energy “Field Testing Plug-in Hybrid Electric Vehicles with Charge Control Technology in the Xcel Energy Territory” Journal of International Conference on Renewable Energies and Power Quality (ICREPQ’11) Las Palmas de Gran Canaria (Spain),13th to 15th April, 2011.
[2] The Pandit G. Patil, Energy Systems Division, Argonne National Laboratory “Advanced Battery Technology for Electric Two- Wheelers” Journal of Energy Systems Division, Argonne National Laboratory June 2009.
[3] Jean-Marc Timmermans1, JulienMatheys, Philippe Lataire, Joeri Van Mierlo, Jan Cappelle2 “A Comparative Study of 12 Electrically Assisted Bicycles” World Electric Vehicle Journal Vol. 3 - ISSN 2032-6653 - © 2009 AVERE.
[4] Ahmad A. Pesaran and Tony Markel, Harshad S. Tataria, David Howell “Battery Requirements for Plug-In Hybrid Electric Vehicles – Analysis and Rationale” Conference Paper of National Renewable Energy Laboratory, USA NREL/CP-540- 42240 July 2009.
[5] Tony Markel, Michael Kuss, and Paul Denholm “Communication and Control of Electric Drive Vehicles Supporting Renewables” Conference Paper of Center for Transportation Technologiesand Systems National Renewable Energy Laboratory, NREL/CP-540-46224 August 2009.
[6] T. Markel, K. Bennion and W. Kramer, National Renewable Energy Laboratory & J. Bryan and J. Giedd Xcel Energy “Field Testing Plug-in Hybrid Electric Vehicles with Charge Control Technology in the Xcel Energy Territory.” Technical Report of National Renewable Energy Laboratory, NREL/TP-550-46345, August 2009.
[7] C. E. (Sandy) Thomas” Fuel Cell and Battery Electric Vehicles Compared” Journal ofH2Gen Innovations, Inc., Alexandria, Virginia, 22304, USA.
[8] Todd Litman, “Efficient V ehicles Versus Efficient Transportation “comparing transportation energy conservation strategies. Journal paper of Victoria Transport Policy Institute 26 August 2009.
[9] An MIT Energy Initiative Symposium, “Electrification of the Transportation System”. Journal paper of An MIT Energy Initiative